This file contains the function declarations for the functions whic are called when a SCPI command is received. More...

#include "scpi.h"

Functions
void	Identify (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Sends an identification message over the given interface.
void	Reset (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Triggers a full reset of the ESP32.
void	OPC (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Sends a 1 over the given interface to indicate that the previous command has finished executing.
void	GetError (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Sends the oldest error message over the given interface.
void	GetHelp (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Sends a help message with all available SCPI commands over the given interface.
void	GetHelpSyntax (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Sends syntax help for a single command header, given as a parameter (e.g. SYSTem:HELP:SYNTax? *IDN?), over the given interface.
void	GetVersion (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Sends the current firmware version of the device over the given interface.
void	GetDebug (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Sends the debug information from Vrekrer-SCPI-Parser over the given interface.
void	Preset (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Rewrites the parameters stored in flash memory with the defaults from the config.h file.
void	SetPort (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetPort (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetIP (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetIP (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetMAC (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetMAC (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetGW (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	Step (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	Perpetual (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetRelativePosition (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetAbsolutePosition (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetAbsolutePosition (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetDirection (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetDirection (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetRMSCurrent (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetRMSCurrent (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetHoldCurrent (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetHoldCurrent (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetMicrosteps (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetMicrosteps (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetSpeed (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetSpeed (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetAcceleration (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetAcceleration (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetGearRatio1 (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetGearRatio1 (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetGearRatio2 (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetGearRatio2 (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	SetStepsPerRev (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetStepsPerRev (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	DebugMotorPins (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetMotorDebug (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	ResetEthernet (SCPI_C commands, SCPI_P parameters, Stream &interface)
void	GetSessionList (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Sends the live SCPI Ethernet session table over the given interface.
void	GetSessionLog (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Sends the ring buffer of recent SCPI session closures (with reason) over the given interface.
void	GetSocketList (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Sends the raw state of all W5500 hardware sockets over the given interface.
void	GetDiagSystem (SCPI_C commands, SCPI_P parameters, Stream &interface)
	Sends system/reset health diagnostics (uptime, heap, reset reason, boot count) over the given interface.

Detailed Description

This file contains the function declarations for the functions whic are called when a SCPI command is received.

Author: Max Heinekamp

Version: 0.1

Date: 22-04-2025

Copyright: Copyright (c) 2025

Definition in file scpi_commands.h.

Function Documentation

◆ DebugMotorPins()

void DebugMotorPins	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 500 of file scpi_commands.cpp.

◆ GetAbsolutePosition()

void GetAbsolutePosition	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 223 of file scpi_commands.cpp.

◆ GetAcceleration()

void GetAcceleration	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 493 of file scpi_commands.cpp.

◆ GetDebug()

void GetDebug	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Sends the debug information from Vrekrer-SCPI-Parser over the given interface.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

Definition at line 58 of file scpi_commands.cpp.

◆ GetDiagSystem()

void GetDiagSystem	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Sends system/reset health diagnostics (uptime, heap, reset reason, boot count) over the given interface.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

Definition at line 553 of file scpi_commands.cpp.

◆ GetDirection()

void GetDirection	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 344 of file scpi_commands.cpp.

◆ GetError()

void GetError	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Sends the oldest error message over the given interface.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

Definition at line 37 of file scpi_commands.cpp.

◆ GetGW()

void GetGW	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 133 of file scpi_commands.cpp.

◆ GetHelp()

void GetHelp	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Sends a help message with all available SCPI commands over the given interface.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

Definition at line 43 of file scpi_commands.cpp.

◆ GetHelpSyntax()

void GetHelpSyntax	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Sends syntax help for a single command header, given as a parameter (e.g. SYSTem:HELP:SYNTax? *IDN?), over the given interface.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command — parameters[0] is the header to look up, matched against its full spelling as printed by SYSTem:HELP:HEADers?.
interface	Pointer to the Stream interface where the SCPI command was received.

Definition at line 47 of file scpi_commands.cpp.

◆ GetHoldCurrent()

void GetHoldCurrent	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 427 of file scpi_commands.cpp.

◆ GetIP()

void GetIP	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 105 of file scpi_commands.cpp.

◆ GetMAC()

void GetMAC	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 121 of file scpi_commands.cpp.

◆ GetMicrosteps()

void GetMicrosteps	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 451 of file scpi_commands.cpp.

◆ GetMotorDebug()

void GetMotorDebug	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 511 of file scpi_commands.cpp.

◆ GetPort()

void GetPort	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 83 of file scpi_commands.cpp.

◆ GetRMSCurrent()

void GetRMSCurrent	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 403 of file scpi_commands.cpp.

◆ GetSessionList()

void GetSessionList	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Sends the live SCPI Ethernet session table over the given interface.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

Definition at line 541 of file scpi_commands.cpp.

◆ GetSessionLog()

void GetSessionLog	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Sends the ring buffer of recent SCPI session closures (with reason) over the given interface.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

Definition at line 545 of file scpi_commands.cpp.

◆ GetSocketList()

void GetSocketList	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Sends the raw state of all W5500 hardware sockets over the given interface.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

Definition at line 549 of file scpi_commands.cpp.

◆ GetSpeed()

void GetSpeed	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 472 of file scpi_commands.cpp.

◆ GetVersion()

void GetVersion	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Sends the current firmware version of the device over the given interface.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

Todo: This could be exapnded to also include a hardware version, which would be set in the config.h file.

Note: The firmware version is defined in the config.h file.

Definition at line 51 of file scpi_commands.cpp.

◆ Identify()

void Identify	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Sends an identification message over the given interface.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

Definition at line 21 of file scpi_commands.cpp.

◆ OPC()

void OPC	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Sends a 1 over the given interface to indicate that the previous command has finished executing.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

As the programm is run sequentially on a single core, this function works by immediately sending a 1 over the interface, as soon controller gets around to processing the command.

Definition at line 32 of file scpi_commands.cpp.

◆ Perpetual()

void Perpetual	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 139 of file scpi_commands.cpp.

◆ Preset()

void Preset	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Rewrites the parameters stored in flash memory with the defaults from the config.h file.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

Definition at line 63 of file scpi_commands.cpp.

◆ Reset()

void Reset	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Triggers a full reset of the ESP32.

Parameters

commands	The SCPI commands that were received.
parameters	The parameters that were passed with the SCPI command.
interface	Pointer to the Stream interface where the SCPI command was received.

Definition at line 28 of file scpi_commands.cpp.

◆ ResetEthernet()

void ResetEthernet	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 524 of file scpi_commands.cpp.

◆ SetAbsolutePosition()

void SetAbsolutePosition	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 254 of file scpi_commands.cpp.

◆ SetAcceleration()

void SetAcceleration	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 479 of file scpi_commands.cpp.

◆ SetDirection()

void SetDirection	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 291 of file scpi_commands.cpp.

◆ SetHoldCurrent()

void SetHoldCurrent	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 409 of file scpi_commands.cpp.

◆ SetIP()

void SetIP	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 90 of file scpi_commands.cpp.

◆ SetMAC()

void SetMAC	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 111 of file scpi_commands.cpp.

◆ SetMicrosteps()

void SetMicrosteps	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 433 of file scpi_commands.cpp.

◆ SetPort()

void SetPort	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 69 of file scpi_commands.cpp.

◆ SetRelativePosition()

void SetRelativePosition	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 185 of file scpi_commands.cpp.

◆ SetRMSCurrent()

void SetRMSCurrent	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 385 of file scpi_commands.cpp.

◆ SetSpeed()

void SetSpeed	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 458 of file scpi_commands.cpp.

◆ Step()

void Step	(	SCPI_C	commands,
		SCPI_P	parameters,
		Stream &	interface )

Definition at line 148 of file scpi_commands.cpp.

Functions

Detailed Description

Function Documentation

◆ DebugMotorPins()

◆ GetAbsolutePosition()

◆ GetAcceleration()

◆ GetDebug()

◆ GetDiagSystem()

◆ GetDirection()

◆ GetError()

◆ GetGW()

◆ GetHelp()

◆ GetHelpSyntax()

◆ GetHoldCurrent()

◆ GetIP()

◆ GetMAC()

◆ GetMicrosteps()

◆ GetMotorDebug()

◆ GetPort()

◆ GetRMSCurrent()

◆ GetSessionList()

◆ GetSessionLog()

◆ GetSocketList()

◆ GetSpeed()

◆ GetVersion()

◆ Identify()

◆ OPC()

◆ Perpetual()

◆ Preset()

◆ Reset()

◆ ResetEthernet()

◆ SetAbsolutePosition()

◆ SetAcceleration()

◆ SetDirection()

◆ SetHoldCurrent()

◆ SetIP()

◆ SetMAC()

◆ SetMicrosteps()

◆ SetPort()

◆ SetRelativePosition()

◆ SetRMSCurrent()

◆ SetSpeed()

◆ Step()